logo

An analytical model for predicting dryout point in bilaterally heated vertical narrow annuli

MISCELLANEOUS

An analytical model for predicting dryout point in bilaterally heated vertical narrow annuli

AYE Myint
TIAN Wen-Xi
JIA Dou-Nan
LI Zhi-Hui
LI Hao
Nuclear Science and TechniquesVol.16, No.1pp.59-64Published in print 01 Feb 2005
47500

Based on the droplet-diffusion model by Kirillov and Smogalev (1969, 1972), a new analytical model of dryout point prediction in the steam-water flow for bilaterally and uniformly heated narrow annular gap was developed. Comparisons of the present model predictions with experimental results indicated that a good agreement in accuracy for the experimental parametric range (pressure from 0.8 to 3.5 MPa, mass flux of 60.39 to 135.6 kg•m-2•s-1 and heat flux of 5 to 50 kW•m-2). Prediction of dryout point was experimentally investigated with deionized water upflowing through narrow annular channel with 1.0 mm and 1.5 mm gap heated by AC power supply.

Narrow annuliBilaterally heatingDryout pointCritical qualityAnnular flow
References
[1] Saito T, Hughes E D, Carbon M W. Nucl Eng Des, 1972, 50: 225-271.
[2] Kirillov P L, Smogalev I P.

Calculating the heat exchange crisis for a vapor-liquid mixture on the basis of a droplet-diffusion model. Report No. FEI-181

, 1969, Institute of Physics and Power Engineering, Obninsk, USSR.
Baidu ScholarGoogle Scholar
[3] Kirillov P L, Smogalev I P.

Calculating of heat transfer crisis for annular two-phase flow of a steam-liquid mixture through an annular channel. Translation of Report FEI-297 (1972) of Institute of Physics and Power Engineering, Obninsk, USSR, as Report AECL-4752 of Chalk River Laboratories

, 1974.
Baidu ScholarGoogle Scholar
[4] Katto Y. Int J Heat Mass Transfer, 1984, 27(6): 883-891.
[5] Tippets F E.

Critical heat fluxes and flow patterns in high pressure boiling water flows

, ASME Winter Annu. Meet., Paper 62-WA-162, New York, 1962.
Baidu ScholarGoogle Scholar
[6] Tippets F E. Trans Am Soc Mech Eng J Heat Transfer, 1964, 86C(1): 23-38.
[7] Knudsen J G, Katz D L. Fluid dynamics and heat transfer, New York: McGraw-Hill, 1958:186.
[8] Doerffer S, Groeneveld D C, Cheng S C. Nucl Eng Des, 1997, 177: 105-120.
[9] Mohamed , El-Genk S, Haynes S J et al. Int J Heat Mass Transfer, 1988, 31(11): 2291-2304.
[10] Ishii M, Grolmes M A. Amer Chem Engin J, 1975, 21(2): 308-318.