A modeling GUI for accelerator physics of the storage ring at SSRF

Guangling CHEN; Shunqiang TIAN; Guimin LIU; Bocheng JIANG

doi:10.13538/j.1001-8042/nst.20.76-81

Your Location：

Home >

Browse articles >

A modeling GUI for accelerator physics of the storage ring at SSRF

SYNCHROTRON TECHNOLOGY AND APPLICATIONS | Updated：2021-01-29

- A modeling GUI for accelerator physics of the storage ring at SSRF
- Nuclear Science and Techniques Vol. 20, Issue 2, (2009)
- Affiliations：
  
  1.Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China
  2.Graduate University of Chinese Academy of Sciences, Beijing 100049, China
- Author bio：
  
  Corresponding author. E-mail address: liugm@sinap.ac.cn
- Funds：
- DOI：10.13538/j.1001-8042/nst.20.76-81
  CLC：
Scan for full text
Cite this article
Guangling CHEN, Shunqiang TIAN, Guimin LIU, et al. A modeling GUI for accelerator physics of the storage ring at SSRF. [J]. Nuclear Science and Techniques 20(2):76-81(2009)
DOI：

Guangling CHEN, Shunqiang TIAN, Guimin LIU, et al. A modeling GUI for accelerator physics of the storage ring at SSRF. [J]. Nuclear Science and Techniques 20(2):76-81(2009) DOI： 10.13538/j.1001-8042/nst.20.76-81.

摘要

Abstract

In this paper, we report a MATLAB-based GUI tool, bodgui, which integrates functions of lattice editor, linear match, and nonlinear optimization, and visualized tracking functions for beam optics design. A user can switch his/her design procedures one to another. Flexibilities are provided for adjusting or optimizing the lattice settings in commissioning or operation of the accelerators. The algorithm of the linear match and nonlinear optimization, and the GUI windows including the main functions and running status, are presented. The SSRF storage ring was employed as a test lattice. Several optics modes designed and optimized by the GUI tools were used for commissioning the storage ring. Functions of bodgui tool are machine-independent, and it can be well applied to modern light sources being built in other parts of the world.

关键词

Keywords

MATLABATGUISSRF storage ringBeam optics design

references

Smith S L. Optimization of modern light source lattices. In: Proceedings of EPAC. Paris, France: 2002, 44-48.

CERN.MADX User’s Guide [EB/OL]. [2006-12-20].http://mad.web.cern.ch/mad/uguide.html.

Streun A. OPA documentation [R].Villigen, Switzerland: PSI, 1997.

Terebilo A. Accelerator Modeling with MATLAB Accelerator Toolbox, In: PAC’01, May 2002, 3203-3205

Xu H J, Zhao Z T. Nucl Sci Tech, 2008, 19: 1-6.

Suller V P, Status of the DIAMOND light source project. In: Proceedings of EPAC. Paris, France, 2002, 757-759.

Kuo C C, Chang H P, Chou P J, Design status of Taiwan photon source. In: Proceedings of EPAC. Genoa, Italy: 2008, 1986-1988.

Fang S X, Qin Q. HEP&NP, 2006, 30: 880-887.

Tian S Q, Liu G M, Calibration of the linear optics in the SSRF storage ring, NS&T, 2008, 19: 257-265.

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

Low-alpha optics design for SSRF

Availability of MCNP & MATLAB for reconstructing the water-vapor two-phase flow pattern in neutron radiography

Calibration of the linear optics in the SSRF storage ring

Related Author

No data

Related Institution

Shanghai Institute of Applied Physics, Chinese Academy of Science

Graduate University of Chinese Academy of Science

School of Energy and Power Engineering, Xi'an Jiaotong University

Graduate University of the Chinese Academy of Sciences

Address：Editorial Office of NST, 2019 Jialuo Road, Jiading, Shanghai 201800, China Postal code：201800
Email：nst@sinap.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 沪ICP备05005479号-1 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰