Laser test of the prototype of CEE time projection chamber

Laser test of the prototype of CEE time projection chamber 1 2 first-author 1 corresp Corresponding author. E-mail address: lufei@sinap.ac.cn Corresponding author. E-mail address: lufei@sinap.ac.cn 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 4 4 4 4 5 1 1 1 Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China University of Chinese Academy of Sciences, Beijing 100049, China University of Chinese Academy of Sciences, Beijing 100049, China State Key Laboratory of Nuclear Physics and Technology, School of Physics, Peking University, Beijing 100871, China State Key Laboratory of Nuclear Physics and Technology, School of Physics, Peking University, Beijing 100871, China China Institute of Atomic Energy, P.O. Box 275(10), Beijing 102413, China China Institute of Atomic Energy, P.O. Box 275(10), Beijing 102413, China Institue of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China Institue of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China A prototype thick-GEM-based CEE (Cooling Storage Ring External-target Experiment) time projection chamber (TPC) is constructed and tested with the pulsed ultraviolet laser beams. The results indicate that the prototype TPC has a good performance in three-dimensional track resolution. In X direction the position resolution is about 0.2 mm, and in Y direction the position resolution is about 0.5 mm. The results also determine that the energy resolution is about 5.4%, which achieve the requirements of the CEE experiment and can be used to study the nuclear state equation and the Quantum Chromo Dynamics. TPC Thick GEM Laser test Track resolution Energy resolution 1. Introduction 1 Experiments of heavy-ion collisions using high-energy beams from the Heavy Ion Research Facility at Lanzhou – Cooling Storage Ring (HIRFL-CSR) [ 1 1 ] provide a significant opportunity to study the nuclear equation of state at high baryon densities [ 2 2 , 3 3 ] and the Quantum Chromo Dynamics (QCD) phase diagram, especially the possible existence of critical point [ 4 4 ] and quarkoyanic matter [ 5 5 , 6 6 ] . The HIRFL-CEE spectrometer [ 7 7 - 16 16 7-16 ] is conceptually designed to measure the various products of 100 MeV/u to 800 MeV/u heavy-ion beams hitting on a heavy-ion target. In the CEE spectrometer, at the center of the homogeneous magnetic field provided by a large acceptance superconducting dipole, a time projection chamber (TPC) [ 17 17 ] is designed to be installed. The task of the TPC is to provide track reconstruction, particle identification and momentum measurement of the light charged particles. The sensitive volume of the TPC is about 90 cm (length) × 100 cm (width) × 80 cm (height). Before the construction of the full-scale CEE-TPC, a small prototype TPC should be constructed and tested to determine whether the TPC’s performance meets the experiment’s requirements. The 3D track resolution and energy loss resolution of charged particles are essential in the TPC performance. Furthermore, a laser beams calibration system is required for the large volume type of TPC [ 18 18 ] . This article provides the description of the prototype CEE-TPC and test results of laser beams. 2. Detector design 1 The prototype CEE-TPC is also a cubic shape TPC, whose sensitive volume is 20 cm (length) × 20 cm (width) × 22 cm (height). A photo of prototype TPC’s field cage is shown in left image of Figure 1 Figure 1 , and the photo of the laser test’s setup is shown in the right image of Figure 1 Figure 1 . The top panels are one layer thick Gas Electron Multiplier (GEM) foil and the readout plane, while the bottom panel is the cathode. The electron drifting field cage lies between the top panels and the bottom panel. The walls of the field cage are made of two kinds of layers, gold-plated metal and insulative plastic. The metal and plastic is arranged at regular intervals that the width of the gold-plated metal is 6 mm and the width of insulative plastic is 4 mm. In order to produce step voltage between the metal strips and fill the cage with an electric field with perfectly uniform intensity, there is a divider resistor of 20 MΩ soldered between adjacent metal strips. The thickness of the GEM foil [ 19 19 - 22 22 19-22 ] is 0.6 mm. The diameter of holes in the GEM foil is 0.6 mm, and the distance between the holes is 1.1 mm. Figure 2 Figure 2 shows the working principle of TPC. The readout panel is divided into several pads and each pad is connected to one channel of preamplifier. The arrow shows the incident direction of the laser beam, and there are three dimensions, X , Y, and Z . The X - Z plane is parallel to the readout plane, and the Y coordinate is perpendicular to X - Z plane. There are two types of pads in this prototype. The size of the rectangle pad is 8 mm (width) × 10 mm (length). The triangle pad can provide precise position resolution in the X direction using the charge-weighting technique. 3. Experimental results 1 A The energy loss and its resolution 2 The gas mixture of this TPC is composed of 90% argon, 7% methane, and 3% CF 4 . A pulsed laser beam with 266 nm in wavelength, which imitates straight charged particle tracks, is used to test the prototype CEE-TPC at three gas pressure conditions (101 kPa, 75 kPa, and 50 kPa). First, the dependence of the energy loss of the laser beam in the gas on the high voltage applied on the GEM foil is studied. Figure 3 Figure 3 shows that the energy loss of the laser beam increases exponentially with the increase of the high voltage applied on the GEM foil. This figure helps to choose an appropriate voltage during the experiment. It is more difficult to apply high voltage on GEM foil, if the gas pressure is lower, the detector could generate sparks more easily. However, changing the voltage among the drift cage or the voltage between the GEM foil and anode panel has a slight effect on the gain of the GEM foil, because changing the voltage slightly changes the electric field near the holes of the GEM foil. We used a Laser Pyroelectric Energy Sensor to measure the energy of the laser beam per pulse with a wavelength of 266 nm. Figure 4 Figure 4 shows that there is a linear correlation between the energy of the laser beam and energy loss measured on one readout pad. Also the smaller of the gas pressure is, the less the energy loss of laser beam is. Since the instability of the energy of laser beam is about 1.5%, we can calculate that in most cases, the average energy resolution of prototype CEE-TPC is about 5.4%. Figure 5 Figure 5 shows the energy loss measured along the laser beam tracks. The differences of energy loss indicate that the gain of the whole piece of GEM foil is not uniform. There is a maximum variation of 5%, which affects the position resolution when using the charge-weighting technique. Further work should be done to calibrate the gain of the GEM. B. The drifting velocity of electrons 2 It is important to know the drifting velocity of electrons at different gas pressures. We changed the electric-filed strength at three kinds of gas pressures and used E/P (electric-field strength per atmosphere pressure) as abscissa. A linear correlation between drifting velocity and E/P can be observed from Fig. 6 Fig. 6 . C. The track resolution 2 Figure 7 Figure 7 and Figure 8 Figure 8 show the different laser beam tracks measured by the prototype CEE-TPC at one atmosphere. The position resolution in the X direction for each pad is about 0.5 mm, and the errors come from energy error. After a full scan of the gain of the GEM foil, the resolution is determined to be about 0.2 mm. The position resolution in the Y direction for each pad is about 0.5 mm, and the errors come from the errors of drifting time of the electrons. 4. Conclusion 1 We have constructed a prototype CEE-TPC with Thick-GEM-based readout that has the ability to reconstruct three-dimensional position. The performance of the TPC detector is studied in details by the test of pulsed ultraviolet laser beams. The correlation between energy loss and GEM’s voltage is exponential relation. The correlation between drifting velocity and electric-field strength is linear relation. The energy loss has a linear relation with total heat quantity. The position resolution in X and Y directions is about 0.2 mm and 0.5 mm, respectively. The average energy resolution of prototype CEE-TPC is about 5.4%. The track resolution and the energy loss resolution of the TPC achieves the requirement of the CEE experiment. References J.W. Xia , W.L. Zhan , B.W. Wei , et al . The heavy ion cooler-storage-ring project (HIRFL-CSR) at Lanzhou . Nucl. Instrum. Meth. A , 2002 , 488 : 11 - 25 . doi: 10.1016/S0168-9002(02)00475-8 http://doi.org/10.1016/S0168-9002(02)00475-8 The heavy ion cooler-storage-ring project (HIRFL-CSR) at Lanzhou C.J. Horowitz , E.F. Brown , Y. Kim , et al . A way forward in the study of the symm-etry energy: experiment, theory, and observation . J. Phys. G Nucl. Partic ., 2014 , 41 : 97 . doi: 10.1088/0954-3899/41/9/093001 http://doi.org/10.1088/0954-3899/41/9/093001 A way forward in the study of the symm-etry energy: experiment, theory, and observation B.A. Li , L.W. Chen , C.M. Ko . Recent progress and new challenges in isospin phys-ics with heavy-ion reactions . Phys. Rep . 464 , 113 - 281 ( 2008 ) doi: 10.1016/j.physrep.2008.04.005 http://doi.org/10.1016/j.physrep.2008.04.005 Recent progress and new challenges in isospin phys-ics with heavy-ion reactions M.A. Stephanov . Sign of kurtosis near the QCD critical point . Phys. Rev. Lett ., 2011 , 107 : 052301 . doi: 10.1103/PhysRevLett.107.052301 http://doi.org/10.1103/PhysRevLett.107.052301 Sign of kurtosis near the QCD critical point L. McLerran . Quarkyonic matter and the revised phase diagram of QCD . Nucl. Phys. A , 2009 , 830 : 709c - 712c . doi: 10.1016/j.nuclphysa.2009.10.063 http://doi.org/10.1016/j.nuclphysa.2009.10.063 Quarkyonic matter and the revised phase diagram of QCD A. Andronic , D. Blaschke , P. Braun-Munzinger , et al . Hadron production in ultra-relativistic nuclear collisions: quarkyonic matter and a triple point in the phase diagr-am of QCD . Nucl. Phys. A , 2010 , 837 : 65 - 86 . doi: 10.1016/j.nuclphysa.2010.02.005 http://doi.org/10.1016/j.nuclphysa.2010.02.005 Hadron production in ultra-relativistic nuclear collisions: quarkyonic matter and a triple point in the phase diagr-am of QCD L.M. Lü , H. Yi , Z.G. Xiao , et al . Conceptual design of the HIRFL-CSR external-target experiment . Sci. China Phys. Mech ., 2017 , 60 : 012021 . doi: 10.1007/s11433-016-0342-x http://doi.org/10.1007/s11433-016-0342-x Conceptual design of the HIRFL-CSR external-target experiment Z. Xiao , L.W. Chen , F. Fu , et al . Nuclear matter at a HIRFL-CSR energy regime . J. Phys. G Nucl. Partic ., 2009 , 36 : 064040 . doi: 10.1088/0954-3899/36/6/064040 http://doi.org/10.1088/0954-3899/36/6/064040 Nuclear matter at a HIRFL-CSR energy regime C.G. Lu , L.M. Duan , H.S. Xu , et al . Test and simulation of a MICROMG-S detector . Chinese Phys. C , 2011 , 35 : 1033 . doi: 10.1088/1674-1137/35/1/010 http://doi.org/10.1088/1674-1137/35/1/010 Test and simulation of a MICROMG-S detector C.S. Ji , M. Shao , H. Zhang , et al . Prospects for searching the η→e+e- rare decay at the CSR . Chinese Phys. C , 2013 , 37 : 046201 . doi: 10.1088/1674-1137/37/4/46201 http://doi.org/10.1088/1674-1137/37/4/46201 Prospects for searching the η→e+e- rare decay at the CSR Z.G. Xiao , G.C. Yong , L.W. Chen , et al . Probing nuclear symmetry energy at high densities using pion, kaon, eta and photon productions in heavy-ion collisions . Euro. Phys. J. A , 2014 , 50 ( 2 ): 1 - 10 . doi: 10.1140/epja/i2014-14037-6 http://doi.org/10.1140/epja/i2014-14037-6 Probing nuclear symmetry energy at high densities using pion, kaon, eta and photon productions in heavy-ion collisions P.F. Wang , Z.K. Li , H.X. Li , et al . Build-up of the silicon micro-strip detector array in ETF of HIRFL-CSR . Nucl. Phys. Rev ., 2014 , 31 : 63 - 68 . doi: 10.11804/NuclPhysRev.31.01.063 http://doi.org/10.11804/NuclPhysRev.31.01.063 Build-up of the silicon micro-strip detector array in ETF of HIRFL-CSR X.W. Zhao , H. Su , Y. Qian , et al . Development of a multi-channel front-end electronics module based on ASIC for silicon strip array detectors . Nucl. Phys. Rev ., 2014 , 31 : 499 - 504 . doi: 10.11804/NuclPhysRev.31.04.499 http://doi.org/10.11804/NuclPhysRev.31.04.499 Development of a multi-channel front-end electronics module based on ASIC for silicon strip array detectors L.F. Kang , L. Zhao , M. Li , et al . Prototype readout electronics system of external experiment in HIRFL-CSR[J] . Atomic Energy Science and Technology , 2015 , 49 : 154 - 161 . doi: 10.7538/yzk.2015.49.01.0154 http://doi.org/10.7538/yzk.2015.49.01.0154 (in Chinese) Prototype readout electronics system of external experiment in HIRFL-CSR[J] L. Zhao , L.F. Kang , J.W. Zhou , et al . A 16-channel high-resolution time and char-ge measurement module for the external target experiment in the CSR of HIRFL . Nucl. Sci. Tech . 2014 , 25 : 010401 . doi: 10.13538/j.1001-8042/nst.25.010401 http://doi.org/10.13538/j.1001-8042/nst.25.010401 A 16-channel high-resolution time and char-ge measurement module for the external target experiment in the CSR of HIRFL L. Kang , L. Zhao , J. Zhou , et al . A 128-channel high precision time measurement module . Metrol. Meas. Sys ., 2013 , 20 ( 2 ): 275 - 286 . doi: 10.2478/mms-2013-0024 http://doi.org/10.2478/mms-2013-0024 A 128-channel high precision time measurement module L. He , S. Zhang , F. Lu , et al . Simulation of momentum resolution of the CEE-TPC in HIRFL . Nucl. Tech . 39 , 070401 ( 2016 ) doi: 10.11889/j.0253-3219.2016.hjs.39.070401 http://doi.org/10.11889/j.0253-3219.2016.hjs.39.070401 (in Chinese) Simulation of momentum resolution of the CEE-TPC in HIRFL J. Abele , J. Berkovitz , J. Boehm , et al . The laser system for the STAR time projection chamber . Nucl. Instrum. Methods , 2003 , 499 : 692 - 702 . doi: 10.1016/S0168-9002(02)01966-6 http://doi.org/10.1016/S0168-9002(02)01966-6 The laser system for the STAR time projection chamber H.B. Liu , Q. Liu , S. Chen , et al . A study of thinner-THGEM, with some applications . J. Instrum ., 2012 , 7 ( 06 ): C06001 . doi: 10.1088/1748-0221/7/06/C06001 http://doi.org/10.1088/1748-0221/7/06/C06001 A study of thinner-THGEM, with some applications Q. Liu , H.B. Liu , S. Chen , et al . A successful application of thinner-THGEMs . Journal of Instrumentation , 2013 , 8 : C11008 . doi: 10.1088/1748-0221/8/11/C11008 http://doi.org/10.1088/1748-0221/8/11/C11008 A successful application of thinner-THGEMs B.L. Wang , Q. Liu , H.B. Liu , et al . Ion transportation study for thick gas electron multipliers . Chinese Phys. Lett ., 2014 , 31 : 122901 . doi: 10.1088/0256-307X/31/12/122901 http://doi.org/10.1088/0256-307X/31/12/122901 Ion transportation study for thick gas electron multipliers X.K. Zhou , Q. Liu , S. Chen , et al . Study of thick gaseous electron multipliers gain stability and some influencing factors . Chinese Phys. Lett ., 2014 , 31 : 032901 . doi: 10.1088/0256-307X/31/3/032901 http://doi.org/10.1088/0256-307X/31/3/032901 Study of thick gaseous electron multipliers gain stability and some influencing factors The authors would like to thank Prof. Qian Liu from University of Chinese Academy of Sciences for his support on thick GEM production and Hai-Yun Wang from Institute of High Energy Physics, Chinese Academy of Sciences for providing equipment to measure the laser beam energy per pulse. 10.1007/s41365-018-0382-4 This work was supported by the National Key Research and Development Program of China (Nos. 2016YFA0400502 and No. 2015CB856904), the National Natural Science Foundation of China (Nos. U1332129, 11475243, 11421505, 11775288 and 11405005), and the "100-talent plan" of Shanghai Institute of Applied Physics (No. Y290061011) and "100-talent plan" from the Chinese Academy of Sciences (No. Y526011011). 2017-11-17 2018-01-13 2018-01-16 2018-02-24 2018-03-01 2021-04-11 © China Science Publishing & Media Ltd. (Science Press), Shanghai Institute of Applied Physics, the Chinese Academy of Sciences, ChineseNuclear Society and Springer Nature Singapore Pte Ltd. 2018 This is a post-peer-review, pre-copyedit version of an article published in Nuclear Science and Techniques. The final authenticated version is available online at: http://dx.doi.org/10.1007/s41365-018-0382-4 http://dx.doi.org/10.1007/s41365-018-0382-4 . 2018 Nuclear Science and Techniques 03 29