Experimental study on the mechanism of flow blockage formation in fast reactor

Wen-Hui Jin; Song-Bai Cheng; Xiao-Xing Liu

doi:10.1007/s41365-023-01246-8

Your Location：

Home >

Browse articles >

Experimental study on the mechanism of flow blockage formation in fast reactor

NUCLEAR ENERGY SCIENCE AND ENGINEERING | Updated：2023-08-14

- Experimental study on the mechanism of flow blockage formation in fast reactor
- Experimental study on the mechanism of flow blockage formation in fast reactor
- 核技术（英文版） 2023年34卷第6期文章编号：84
- Affiliations：
  
  1.Sino-French Institute of Nuclear Engineering & Technology, Sun Yat-Sen University, Zhuhai 519082, China
- Author bio：
  
  *chengsb3@mail.sysu.edu.cn
- Funds：
  
  Basic and Applied Basic Research Foundation of Guangdong Province(2021A1515010343;2022A1515011582);Science and Technology Program of Guangdong Province(2021A0505030026;2022A0505050029)
- DOI：10.1007/s41365-023-01246-8
  中图分类号：
Scan for full text
Experimental study on the mechanism of flow blockage formation in fast reactor[J]. 核技术（英文版）, 2023,34(6):84

Wen-Hui Jin, Song-Bai Cheng, Xiao-Xing Liu. Experimental study on the mechanism of flow blockage formation in fast reactor[J]. Nuclear Science and Techniques, 2023,34(6):84
Experimental study on the mechanism of flow blockage formation in fast reactor[J]. 核技术（英文版）, 2023,34(6):84 DOI： 10.1007/s41365-023-01246-8.

Wen-Hui Jin, Song-Bai Cheng, Xiao-Xing Liu. Experimental study on the mechanism of flow blockage formation in fast reactor[J]. Nuclear Science and Techniques, 2023,34(6):84 DOI： 10.1007/s41365-023-01246-8.

摘要

Abstract

Various sources of solid particles might exist in the coolant flow of a liquid metal cooled fast reactor (e.g., through chemical interaction between the coolant and impurities, air, or water, through corrosion of structural materials, or from damaged/molten fuel). Such particles may cause flow blockage accidents in a fuel assembly, resulting in a reduction in coolant flow, which potentially causes a local temperature rise in the fuel cladding, cladding failure, and fuel melt. To understand the blockage formation mechanism, in this study, a series of simulated experiments was conducted by releasing different solid particles from a release device into a reducer pipe using gravity. Through detailed analyses, the influence of various experimental parameters (e.g., particle diameter, capacity, shape, and static friction coefficient, and the diameter and height of the particle release nozzle) on the blockage characteristics (i.e., blockage probability and position) was examined. Under the current range of experimental conditions, the blockage was significantly influenced by the aforementioned parameters. The ratio between the particle diameter and outlet size of the reducer pipe might be one of the determining factors governing the occurrence of blockage. Specifically, increasing the ratio enhanced blockage (i.e., larger probability and higher position within the reducer pipe). Increasing the particle size, particle capacity, particle static friction coefficient, and particle release nozzle diameter led to a rise in the blockage probability; however, increasing the particle release nozzle height had a downward influence on the blockage probability. Finally, blockage was more likely to occur in non-spherical particles case than that of spherical particles. This study provides a large experimental database to promote an understanding of the flow blockage mechanism and improve the validation process of fast reactor safety analysis codes.

关键词

Keywords

Liquid metal cooled fast reactorFlow blockageGranular jammingExperimental study

references

Y. Gao, Y. Zhu, Analysis of the influence on environmental radiation level of Qinshan area caused by Fukushima nuclear accident. Nucl. Sci. Tech. 25, S010606 (2014). doi: 10.13538/j.1001-8042/nst.25.S010606http://doi.org/10.13538/j.1001-8042/nst.25.S010606

T. Zhang, S. Cheng, T. Zhu et al., A new experimental investigation on local fuel-coolant interaction in a molten pool. Ann. Nucl. Energy. 120, 593-603(2018). doi: 10.1016/j.anucene.2018.06.031http://doi.org/10.1016/j.anucene.2018.06.031

S. Cheng, H. Yamano, Y. Suzuki et al., Characteristics of self-leveling behavior of debris beds in aseries of experiments. Nucl. Eng. Technol. 45 (3), 323-334. doi: 10.5516/NET.02.2012.068http://doi.org/10.5516/NET.02.2012.068

G. Yang, H. Liao, T. Ding et al., Development and validation of a new oxide fuel rod performance analysis code for the liquid metal fast reactor. Nucl. Sci. Tech. 33(5), 66(2022). doi: 10.1007/s41365-022-01045-7http://doi.org/10.1007/s41365-022-01045-7

X. Luo, C. Wang, Z. Zou et al., Development and application of a multi-physics and multi-scale coupling program for lead-cooled fast reactor. Nucl. Sci. Tech. 33, 18 (2022). doi: 10.1007/s41365-022-01008-yhttp://doi.org/10.1007/s41365-022-01008-y

W.S. Duan, Z. Zou, X. Luo et al., Startup scheme optimization and flow instability of natural circulation lead-cooled fast reactor SNCLFR-100. Nucl. Sci. Tech. 32, 133 (2021). doi: 10.1007/s41365-021-00970-3http://doi.org/10.1007/s41365-021-00970-3

X. Luo, L. Cao, W. Feng et al., Development of a subchannel code for blockage accidents of LMFRs based on the 3D fuel rod model. Nucl. Sci. Tech. 33(2), 27 (2022). doi: 10.1007/s41365-022-01010-4http://doi.org/10.1007/s41365-022-01010-4

K. Shi, S. Li, X. Zhang et al., Partial flow blockage analysis of the hottest fuel assembly in SNCLFR-100 reactor core. Nucl. Sci. Tech. 29, 16 (2018). doi: 10.1007/s41365-017-0351-3http://doi.org/10.1007/s41365-017-0351-3

J. T. Han (ed.), Blockages in LMFBR fuel assemblies: a review of experimental and theoretical studies. (ERDA, USA, 1977). doi: 10.2172/7301883http://doi.org/10.2172/7301883

K. V. Tichelen, Blockages in LMFR fuel assemblies. (SCK CEN, Belgium, 2012)

K. Natesan, K. Velusamy, P. Selvaraj et al., Thermal hydraulic study on detection of random failure of fuel by delayed neutron detection system. Nucl. Eng. Des. 237(23), 2219-2231 (2007). doi: 10.1016/j.nucengdes.2007.03.045http://doi.org/10.1016/j.nucengdes.2007.03.045.

M. Adorni, A. Bousbia-Salah, T. Hamidouche et al., Analysis of partial and total flow blockage of a single fuel assembly of an MTR research reactor core. Ann. Nucl. Energy. 32(15), 1679-1692 (2005). doi: 10.1016/j.anucene.2005.06.001http://doi.org/10.1016/j.anucene.2005.06.001.

I. Di Piazza, M. Fabrizio, T. Mariano et al., A CFD analysis of flow blockage phenomena in ALFRED LFR demo fuel assembly. Nucl. Eng. Des. 276, 202-215 (2014). doi: 10.1016/j.nucengdes.2014.05.033http://doi.org/10.1016/j.nucengdes.2014.05.033.

M. Sarkar, K. Velusamy, P. Munshi et al., Investigation of heat transfer from a totally blocked fuel subassembly of fast breeder reactor with 7 and 19 pin bundles. Nucl. Eng. Des. 338, 74-91 (2018). doi: 10.1016/j.nucengdes.2018.08.001http://doi.org/10.1016/j.nucengdes.2018.08.001.

I. Di Piazza, R. Marinari, N. Forgione et al., CFD analyses of the internal blockage in the NACIE-UP fuel pin bundle simulator. Paper presented at the 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics NURETH-17, Xi'an Jiaotong University, Xi'an, 3-8 September 2017.

R. Marinari, I. Di Piazza, N. Forgione et al., Pre-test CFD simulations of the NACIE-UP BFPS test section. Ann. Nucl. Energy. 110, 1060-1072 (2017). doi: 10.1016/j.anucene.2017.08.046http://doi.org/10.1016/j.anucene.2017.08.046.

J. Pacio, M. Daubner, F. Fellmoser et al., Heat transfer experiment in a partially (internally) blocked 19-rod bundle with wire spacers cooled by LBE. Nucl. Eng. Des. 330:225-240 (2018).

R. Marinari, I. Di Piazza, M. Tarantino et al., Blockage fuel pin simulator experiments and simulation. Nucl. Eng. Des. 353, 110215 (2019). doi: 10.1016/j.nucengdes.2019.110215http://doi.org/10.1016/j.nucengdes.2019.110215.

T. Kiwing, Y.L. Pik, H.K. Pak, Jamming of granular flow in a two-dimensional hopper. Phys. Rev. Lett. 86(1), 71-74 (2001).

I. Zuriguel, A. Garcimartin, D. Maza et al., Jamming during the discharge of granular matter from a silo. Phys. Rev. E 71, 051303(2005). doi: 10.1103/PhysRevE.71.051303http://doi.org/10.1103/PhysRevE.71.051303.

I. Zuriguel, L. Pugnaloni, A. Luis et al., Jamming during the discharge of grains from a silo described as a percolating transition. Phys. Rev. E. 68, 030301 (2003). doi: 10.1103/PhysRevE.68.030301http://doi.org/10.1103/PhysRevE.68.030301

J. Sienicki, in Lead-Cooled Fast Reactors. ed. by A. Waltar, D. Todd, Tsvetkov (Springer, Boston, 2012). doi: 10.1007/978-1-4419-9572-8_18http://doi.org/10.1007/978-1-4419-9572-8_18

F.S. Craig, G.H. William, W.B. Neil et al., SSTAR: The US lead-cooled fast reactor (LFR), J. Nucl. Mater. 376, 255-259 (2008). doi: 10.1016/j.jnucmat.2008.02.049http://doi.org/10.1016/j.jnucmat.2008.02.049.

F. Roelofs (ed.), Thermal hydraulics aspects of liquid metal cooled nuclear reactors. (Woodhead Publishing, U.K., 2018), pp. 17-47. doi: 10.1016/B978-0-08-101980-1.00003-Xhttp://doi.org/10.1016/B978-0-08-101980-1.00003-X.

S. Cheng, P. Gong, S. Wang et al., Investigation of flow regime in debris bed formation behavior with nonspherical particles. Nucl. Eng. Technol. 50, 43-53 (2018). doi: 10.1016/j.net.2017.09.003http://doi.org/10.1016/j.net.2017.09.003.

P.C. Arnold, A.G. McLean, An analytical solution for the stress function at the wall of a converging channel. Powder Technol. 13(2), 255-260 (1976). doi: 10.1016/0032-5910(76)85011-5http://doi.org/10.1016/0032-5910(76)85011-5.

A. Drescher, A. J. Waters, C.A. Rhoades, Arching in hoppers: ii. arching theories and critical outlet size. Powder Technol. 84(2), 177-183 (1995). doi: 10.1016/0032-5910(95)029828http://doi.org/10.1016/0032-5910(95)029828.

A. W. Jenike, Steady gravity flow of frictional-cohesive solids in converging channels. J. Appl. Mech. 31(1): 5-11 (1964). doi: 10.1115/1.3629571http://doi.org/10.1115/1.3629571.

D.M. Walker, An approximate theory for pressures and arching in hoppers. Chem. Eng. Sci. 21(11), 975-997 (1966). doi: 10.1016/0009-2509(66)85095-9http://doi.org/10.1016/0009-2509(66)85095-9.

R.A. Meyers(ed.), Statistical Mechanics of Clogging. (Springer, Berlin, 2020), doi: 10.1007/978-3-642-27737-5_746-1http://doi.org/10.1007/978-3-642-27737-5_746-1

A. Janda, I. Zuriguel, A. Garcimartin et al., Jamming and critical outlet size in the discharge of a two-dimensional silo. Europhys. Lett. 84(4):44002 (2008). doi: 10.1209/02955075/84/44002http://doi.org/10.1209/02955075/84/44002

L. Pournin, M. Ramaioli, P. Folly et al., About the influence of friction and poly-dispersi-tyon the jamming behavior of bead assemblies. Eur. Phys. J. E. 23(2), 229-235 (2007). doi: 10.1140/epje/i2007-10176-5http://doi.org/10.1140/epje/i2007-10176-5

L. A. Pugnaloni, M.G. Valluzzi, L. G. Valluzzi, Arching in tapped deposits of hard disks. Phys. Rev. E. 73, 051302 (2006). doi: 10.1103/physreve.73.051302http://doi.org/10.1103/physreve.73.051302.

G. A. Kohring, S. Melin, H. Puhl et al., Computer simulations of critical, non-station-ary granular flow through a hopper. Comput. Method. Appl. M. 124(3), 273-281 (1995). doi: 10.1016/0045-7825(94)00743-7http://doi.org/10.1016/0045-7825(94)00743-7.

M. Hou, W. Chen, T. Zhang et al., Global nature of dilute-to-dense transition of granular flows in a 2d channel. Phys. Rev. Lett. 91(20), 204301 (2003). doi: 10.1103/PhysRevLett.91.204301http://doi.org/10.1103/PhysRevLett.91.204301.

S. Cheng, H. Tagami, H. Yamano et al., An investigation on debris bed self-leveling beh-avior with non-spherical particles. J. Nucl. Sci. Technol. 51, 1096-1106 (2014). doi: 10.1080/00223131.2014.910478http://doi.org/10.1080/00223131.2014.910478.

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

Experimental investigation on pressure-buildup characteristics of a water lump immerged in a molten lead pool

Development of a subchannel code for blockage accidents of LMFRs based on the 3D fuel rod model

Partial flow blockage analysis of the hottest fuel assembly in SNCLFR-100 reactor core