Optimization analysis using orthogonal array designs for magnet girder assembly of SSRF

SYNCHROTRON TECHNOLOGY AND APPLICATIONS

Optimization analysis using orthogonal array designs for magnet girder assembly of SSRF

WANG Xiao，

YAN Zhongbao，

DU Hanwen

Nuclear Science and Techniques

Vol.23, No.1

pp.1-6

Published in print 20 Feb 2012

DOI：10.13538/j.1001-8042/nst.23.1-6

40100

An optimization analysis for finite element (FE) results by variance analysis method (VAM) of orthogonal array designs (OADs) was performed to improve the dynamic performance of the prototype magnet girder assembly (MGA) in the storage ring of the Shanghai Synchrotron Radiation Facility (SSRF). Seven factors were considered. The analyses show that the most important factor for the first eigenfrequency is stiffness of the support systems, and the main factor resulting in the relatively low first eigenfrequency of the MGA is its weak support systems. From the OADs optimization analysis, mechanical design of the MGA was improved, and its dynamic performance was improved obviously.

Finite elementOptimizationOrthogonal array designDynamic performance

References

[1]

Wang X, Chen L, Yan Z B, et al. J Synchrotron radiat, 2008, 15: 385-391.

[2]

Leung K K. Proceedings of the 1993 Particle Accelerator Conference, Washington DC, USA, May 1993, 1503-1505.

[3]

Zhang L. Proceedings of the Seventh European Particle Accelerator Conference, Vienna, Austria, June 2000, 2489-2491.

[4]

Mangra D, Sharma S. Rev Sci Instrum, 1996, 67: 3374-376.

[5]

Tsumaki K, Kumagai N. Proceedings of the 2001 Particle Accelerator Conference, Chicago, USA, June 2001, 1482-484.

[6]

Wang D J, Perng S Y. The 1st International Workshop on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation, Viligen, Switzerland, July, 2000.

[7]

Tseng T C. Fifth International Workshop on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation/Fifteenth Pan-American Synchrotron Radiation Instrumentation Conference, Saskatoon, Canada, July, 2008.

[8]

McKinlay J, Barg B. International Workshop on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation 2006, Hyogo, Japan, May 2006.

[9]

Dell'Orco D. 22nd ICFA workshop on ground motion in future accelerator, SLAC, USA, November, 2000.

[10]

Huang H C, Kay J. Proceedings of the 10th European Particle Accelerator Conference, Edinburgh, Scotland, June 2006: 3338-3340.

[11]

Masuzawa M, Ohsawa Y. The 8th International Workshop on Accelerator Alignment, Geneva, Switzerland, October 2004

[12]

Maher M. Fifth International Workshop on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation/Fifteenth Pan-American Synchrotron Radiation Instrumentation Conference, Saskatoon, Canada, July, 2008.

[13]

Ravindranath V, Sharma S, Fifth International Workshop on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation/Fifteenth Pan-American Synchrotron Radiation Instrumentation Conference, Saskatoon, Canada, July, 2008.

[14]

Salajegheh E, Vanderplaats G N. Struct Optimiz, 1993, 16: 79-83

[15]

Beckers M. Int J Numer Meth Eng, 2000, 48: 1761-1784.

[16]

Rajeev S, Krishnamoorthy C S, J Struct Eng ASCE, 1992, 118: 1233-1250.

[17]

Dhingra A K, Bennage W A. Eng Opt, 1995, 24: 177-185.

[18]

Wang R X. Mathematical statistics, Xi'an (In Chinese), Xi'an jiaotong university press, 2005, 150-160.

[19]

Long Y Q, Bao S H. Structural Mechanics Course (In Chinese), Beijing: Higher education press, 2002, 200-205.