logo

Synchrotrons radiation stability measurement and improvement

SYNCHROTRON TECHNOLOGY AND APPLICATIONS

Synchrotrons radiation stability measurement and improvement

Tang Siwei
Yin Chongxian
Liu Dekang
Nuclear Science and TechniquesVol.23, No.1pp.7-9Published in print 20 Feb 2012
32200

In the 3rd generation synchrotron light source, beside the orbit, air disturbance and ground vibration also could affect the position stability of photon beam in synchrotrons radiation measurement. In the condition of implementation of orbit feedback system at SSRF, the measured position stability of photon beam in synchrotrons radiation measurement station was presented in this paper. And then the improvement methods of position stability of photon beam were discussed. Finally the measured result was shown when the designed feedback system is implemented to improve the position stability of photon beam.

Synchrotrons radiation measurementPosition sensitive detector
References
[1] Liu M, Yin C X, Liu D K. Nucl Sci Tech, 2009, 20: 257-260.
[2] Han L F, Yuan R X, Yu L Y, et al. Nucl Sci Tech, 2008, 19: 274-277.
[3] Two-dimensional PSD, S1880, S2044. Hamamatsu Photonics K.K.
[4]

Signal processing circuit for 2-D PSD

, Signal processing circuit designed to facilitate operation of 2-D Position Sensitive Detector, C4674, C7563. Hamamatsu Photonics K.K.
Baidu ScholarGoogle Scholar