Graft co-polymerization of maleic acid and vinyl acetate onto poly(vinylidene fluoride) powder by pre-irradiation technique

RADIOCHEMISTRY, RADIOPHARMACEUTICALS AND NUCLEAR MEDICINE

Graft co-polymerization of maleic acid and vinyl acetate onto poly(vinylidene fluoride) powder by pre-irradiation technique

ZHANG Bowu，

WEI Rongmao，

YU Ming，

DENG Bo，

LI Linfang，

LI Jingye

Nuclear Science and Techniques

Vol.23, No.2

pp.103-108

Published in print 20 Apr 2012

DOI：10.13538/j.1001-8042/nst.23.103-108

41800

Binary monomers of maleic acid and vinyl acetate are grafted onto poly(vinylidene fluoride) (PVDF) powder by pre-irradiation induced graft polymerization technique in emulsion solution. The co-grafting of binary monomers is successfully proved by FT-IR spectroscopy analysis. The influences of the absorbed dose, reaction temperature, reaction time, total concentration of monomers, and feed ratio of binary monomers on the degree of grafting are investigated. The thermal property of grafted PVDF powder was characterized by differential scanning calorimetry (DSC) and thermo-gravimetry analysis (TGA).

PVDF powderGraft co-polymerizationPre-irradiation induced graft polymerizationMaleic AcidVinyl acetate

References

[1]

Kim K J, Cho H W, Yoon K J, Eur Polym J, 2003, 39: 1249-1265.

[2]

Liu Z H, Marechal P, Jerome R, Polymer, 1998, 39: 1779-1785.

[3]

Mascia L, Hashim K, J Appl Polym Sci, 1997, 66: 1911-1923.

[4]

Mascia L, Hashim K, Polymer, 1998, 39: 369-378.

[5]

Na B, Xu W, Lv R, et al. Macromolecules, 2010, 43: 3911-3915.

[6]

Ratajska A, Kulak W, Poeppel A, et al. Pol J Chem Tech, 2009, 11: 27-34.

[7]

Wang H G, Mu B, Ren J-F, et al. Polym Compos 2009, 30: 1326-1332.

[8]

Wang H G, Ren J F, Jian L Q, et al. J Macromol Sci Part B, 2008, 47: 701-711.

[9]

Gao Q, Scheinbeim J I, Macromolecules, 2000, 33: 7564-7572.

[10]

Gao Q, Scheinbeim J I, Newman B A, J Polym Sci Part B, 1999, 37: 3217-3225.

[11]

Li Y, Kaito A, Macromol Rapid Commun, 2003, 24: 255-260.

[12]

Li Y, Shimizu H, Furumichi T, et al. J Polym Sci Part B, 2007, 45: 2707-2714.

[13]

Liu ZH, Marechal P, Jerome R, Polymer, 1997, 38: 5149-5153.

[14]

Yoon L K, Kim B K, J Appl Polym Sci, 2000, 78: 1374-1380.

[15]

Chen Z, Li T, Liu X, et al. J Polym Sci Part B, 2005, 43: 2514-2523.

[16]

Jung C H, Choi J H, Lim Y M, et al. Macromol Symp, 2007, 249: 573-579.

[17]

Yu H Y, Zhang Y, Ren W T, J Polym Sci Part B, 2009, 47: 877-887.

[18]

Yu Z Z, Ou Y C, Qi Z N, et al. J Polym Sci Part B, 1998, 36: 1987-1994.

[19]

Yu Z Z, Ke Y C, Ou Y C, et al. J Appl Polym Sci, 2000, 76: 1285-1295.

[20]

Spadaro G, De Gregorio R, Galia A, et al. Polymer, 2000, 41: 3491-3494.

[21]

Singh S K, Tambe S P, Samui A B, et al. J Appl Polym Sci, 2004, 93: 2802-2807.

[22]

Peng J, Xia H, Zhai M, et al. Radiat Phys Chem, 2007, 76: 1741-1745.

[23]

Ha C S, Lee W K, Roe T W, et al. Polym Bull, 1993, 31: 359-365.

[24]

Spyriouni T, Vergelati C, Macromolecules, 2001, 34: 5306-5316.

[25]

Gong Q, Du S L, Dong S X, J Jilin Inst Chem Tech, 2001, 18: 18-21.

[26]

Linares A, Acosta JL, Polym Bull, 1996, 36: 241-247.

[27]

Yu M, Zhang B W, Deng B, et al. J Appl Polym Sci, 2010, 117: 3575-3581.

[28]

Yu Y, Zhang BW, Yang XX, et al. Nucl Sci Tech, 2011, 22: 25-29.

[29]

Li L F, Yu Y, Deng B, et al. Nucl Sci Tech, 2011, 22: 160-164.

[30]

Dargaville T R, George G A, Hill D J T, et al. Prog Polym Sci, 2003, 28: 1355-1376.

[31]

Deng B, Yu M, Yang X X, et al. J Membr Sci, 2010, 350: 252-258.

[32]

Deng B, Yu Y, Zhang B W, et al. Radiat Phys Chem, 2011, 80: 159-163.

[33]

Forsythe J S, Hill D J T, Prog Polym Sci, 2000, 25: 101-136.

[34]

Nasef M M, Saidi H, Dahlan K Z M, Radiat Phys Chem, 2011, 80: 66-75.

[35]

Adem E, Rickards J, Burillo G, et al. Radiat Phys Chem, 1999, 54: 637-641.

[36]

Clochard M C, Bègue J, Lafon A, et al. Polymer, 2004, 45: 8683-8694.

[37]

Yang C Q, Gu X H, J Appl Polym Sci, 2001, 81: 223-228.