logo

Mutation induction of Pleurotus ferulae by low-energy N+ ion implantation and characters of the selected mutant

LOW ENERGY ACCELERATOR, RAY TECHNOLOGY AND APPLICATIONS

Mutation induction of Pleurotus ferulae by low-energy N+ ion implantation and characters of the selected mutant

CHEN Henglei
WAN Honggui
ZHANG Jun
ZENG Xianxian
Nuclear Science and TechniquesVol.19, No.1pp.13-16Published in print 20 Feb 2008
31400

In order to obtain Pleurotus ferulae with high temperature tolerance, mycelium mono-cells of wild type strain ACK was treated by nitrogen ion (5~30 keV, 1.5×1015~1.5×1016 cm-2) implantation, and mutant CGMCC1762 was selected through auxotrophy screening method, which was Lys, VB6 auxotrophy stress with high temperature. We found that during riper period the surface layer mycelium of the mutant was not aging neither grew tegument even above 30°C. The mycelium endurable temperature of the mutant was increased 7°C compared with that of the wild type strain. The fruiting bodies growth temperature of the mutant was 16~20°C in daytime and was 6~12°C at night. The highest growth temperature of fruiting bodies of the mutant was increased by 5°C than that of original strain. Through three generation investigation, we found that the mutant CGMCC1762 was stable with high temperature tolerance.

Pleurotus ferulaeN+ beamHigh temperature tolerance
References
[1] Yu Z L, Wang X D. J Anhui Agric Sci, 1989, 28: 12-16.
[2] Yu Z L, Qiu L J, Huo Y P, et al. J. Anhui Agric Col, 1991, 18: 251-257.
[3] Shao C L, Yu Z L. J. Anhui Agric Univ, 1994, 21: 349-352.
[4] Yu Z L. On ion beam applied to bio-tech. Hefei: Anhui scientific and technical press, 1998, 77-105.
[5] Yu Z L, Huo Y P. J Anhui Agric Univ, 1994, 21: 221-225.
[6] Yu Z L. IEEE Trans Plasma Sci, 2000, 28: 128-132.
[7] Yu Z L, Deng J G, He J J, et al. Nucl Instrum Methods Phys Res, 1991, B59/60: 705-708.
[8] Wu L J, Gerhard R P, Xu A. Proc Natl Acad Sci, 1999, 96: 4959-4964.
[9] Wu L F, Yu Z L. Radiat Environ Biophys, 2001, 40: 53-57.
[10] Yuan C L, Wang J, Shang Y. Food Technol Biotechnol, 2002, 40: 311-315.
[11] Yu L, Yu Z L. High Technol Letter, 2002, 12: 41-46.
[12] Wu M, Li S, Yao J. World J Microbiol Biotechnol, 2005, 21: 1045-1049.
[13] Wang H, Gao X, Guo J H. Plasma Sci Tech, 2002, 4: 1591-1596.
[14] Li S C, Wu M, Yao J M. Plasma Sci Tech, 2005, 7: 2697-2700.