An active-passive beam current transformer

SYNCHROTRON TECHNOLOGY AND APPLICATIONS

An active-passive beam current transformer

ZHOU Wei，

SUN Baogen，

LU Ping，

WANG Xiaohui，

WANG Yong，

ZHANG Haiyan

Nuclear Science and Techniques

Vol.19, No.2

pp.70-73

Published in print 20 Apr 2008

DOI：10.1016/S1001-8042(08)60025-1

CLC：TL506

31200

In this article, a new type current transformer was developed using an active-passive circuit to improve low frequency response of the system without impairing high frequency response. The active-passive current transformer with In-flange was fabricated. Theoretical analysis, numerical simulations and experimental results are given.

Beam current transformerActive-passive circuitIn-flangeFrequency response

References

[1]

Kesselman M, Witkover R, Doolittle L, et al. AIP Conf Proc, 2000, 546: 464-472.

[2]

Kesselman M. Nucl Instrum Methods Phys Res A, 2005, 536: 22-28.

[3]

Odier P. Proc DIPAC, 2003, 216-218.

[4]

Sun B G, Lu P, Wang J H et al. J Syst Eng Electron, 2000, 11: 9-13.

[5]

Fang Z G, Li H, Leng Y B, et al. At Energy Sci Technol (in Chinese), 1998, 32: 79-83.

[6]

http://www.bergoz.com/products/In-Flange.CT/In-Flange.CT.html.